My Cart:

0 item(s) - $0.00
You have no items in your shopping cart.

Search results for 'metal cutting blade 10"'

Items 1 to 10 of 198 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction
  1. Abrasive Sanding Belts 4" x 54" -100 Grit (A/O)

    Abrasive Sanding Belts 4" x 54" -100 Grit (A/O)

    Heleta's sanding belts are made with aluminum oxide or zirconia with a waterproof cotton fabric substrate. Time and money are more important than ever, and our long lasting joined sanding belts allow you to get the job done sooner and more economically. Designed for high speed sanding and finishing of flat surfaces on wood, plastic and fiberglass, grinding and finishing metal, blending welds and abrasive plaining of wood. Available in many different sizes and grits. Learn More
    $3.55
  2. Abrasive Sanding Belts 4" x 24" -150 Grit (Zirconia)
  3. Abrasive Sanding Belts 1" x 42" -80 Grit (Zirconia)
  4. 10pk Wet/Dry Sandpaper 5.5" x 9" -240

    10pk Wet/Dry Sandpaper 5.5" x 9" -240

    Heleta's wet/dry sandpaper is made from sharp synthetic silicon carbide, cuts fast and smooth for wet or dry sanding between coats of varnish, paint or other finishes, sanding metal for repainting or prior primer coat, and wet finishing of plastic/fiberglass and top coats. Time and money are more important than ever, and our long lasting sandpaper allow you to get the job done sooner and more economically. Use with water or oil to reduce clogging and extend abrasive life. Available in 5x9 and 9x11 individual sheets. Learn More
    $1.40
  5. (Single) Wet/Dry Sandpaper 5.5" x 9" -1000
  6. Flap Disc 4.5" x 7/8" -120 Grit (A/O-Type27)

    Flap Disc 4.5" x 7/8" -120 Grit (A/O-Type27)

    Heleta's Flap Discs have no equal. The time and money saved allows you to get the job done sooner and more economically. Three times faster material removal than fiber resin metal sanding discs, our Flap Discs grind and finish at the same time. The overlapping abrasive cloth also provides up to twenty times longer life, and allows for aggressive edge grinding. Lightweight fiberglass backing provides optimal grinding angle of either a Type 29 (10 to 25 degrees), or a flat Type 27. Aluminum oxide discs allow affordable grinding and finishing of wood, plastic, and most metals, except stainless steel and aluminum which require zirconia. Learn More
    $1.23
  7. (Single) Wet/Dry Sandpaper 9" x 11" -220
  8. 100pk Flap Disc 4.5" x 7/8" -40 Grit (A/O-Type27)
  9. Abrasive Metal Grinding Wheel 7 x 1/4" x 5/8"-11
  10. Abrasive Sanding Belts 1/2" x 24" -36 Grit (A/O)

Items 1 to 10 of 198 total

Page:
  1. 1
  2. 2
  3. 3
  4. 4
  5. 5

Grid  List 

Set Ascending Direction